The Bit-Checks can be positioned upright at the workplace so the tool is always quickly to hand.
- BiTorsion bits for long service life
- Quick-release chuck with Rapidaptor technology
- Take it easy tool finder: colour coding according to profile and size
- The Bit-Checks by Wera are extremely compact and are therefore the ideal companion for mobile applications.
- Upright positionable Bit-Checks convince due to their functionality in a minimum of space
Product features
At the workplace
BiTorsion Bits
Premium bits with torsion zone into which kinetic energy is dissipated during peak loads. With softer BiTorsion zone to prevent the bit tip from twisting at high loads. This significantly increases product life. Tough design for universal use.
Rapidaptor holder
Lightning-fast bit change without any extra tools. One-handed operation. With fast-rotating sleeve for easy wielding of the screwdriver.
Chuck-all
The Rapidaptor quick-release chucks hold ¼" DIN ISO 1173-C 6,3 and E 6,3 as well as Wera series 1 and 4 bits.
Rapid-in and self-lock
The bit can be pushed into the adaptor without moving the sleeve. The lock is activated automatically as soon as the bit is applied to the screw. Bits are held securely and wobble-free.
Rapid-out
Simply push the sleeve forward to change the bit. The spring mechanism lifts the bit off the magnet and unlocks the tool. The bit can be easily removed. The rapid-out function makes it easy to remove even the smallest bits without extra tools.
Find out more about this product
Product description
Tough-absorbing bits for universal use. BiTorsion bits with a torsion zone - where kinetic energy is diverted from peak loads. This greatly extends the product service life. Offer the best possible service life with the appropriate holder. Comes with Rapidaptor technology, which allows bits to be attached without any need to actuate the sleeve. The removal of the bit is simple, just by pushing the sleeve forward - for rapid bit change with just one hand. For the take-up of bits with 1/4" hexagon head drive as per DIN ISO 1173-C 6.3 und E 6.3. For insertion in the power screwdriver or into the chuck of the power drill. The multi-component Bit-Check is convincing on account of its low weight and the maximum possible degree of compactness. In this respect, the soft material in the lower section of the Bit-Check ensures that the bits are securely held whilst being simple to remove at the same time. The profile and size of the bits are easy to recognise thanks to the Wera Take it easy Tool Finder with its colour coding and clearly visible imprint.
Tools in this set
11/4" x 50 mm
05052502001
2PH 1 x 25 mm
05056420001
5PH 2 x 25 mm
05056422001
2PH 3 x 25 mm
05056424001
2PZ 1 x 25 mm
05056720001
6PZ 2 x 25 mm
05056722001
2PZ 3 x 25 mm
05056724001
10
Show more
1TX 10 x 25 mm
05066120001
2TX 15 x 25 mm
05066122001
2TX 20 x 25 mm
05066124001
2TX 25 x 25 mm
05066126001
2TX 30 x 25 mm
05066128001
1TX 40 x 25 mm
05066130001
10
Show more
