The Bit-Checks can be positioned upright at the workplace so the tool is always quickly to hand.
- Upright positionable, multi-component Bit-Check
- Rapidaptor holder for rapid bit change
- BiTorsion bits for long service life
- Tough viscous bits for universal use
- Take it easy tool finder: colour coding according to profile and size
Product features
At the workplace
BiTorsion Bits
Premium bits with torsion zone into which kinetic energy is dissipated during peak loads. With softer BiTorsion zone to prevent the bit tip from twisting at high loads. This significantly increases product life. Tough design for universal use.
BiTorsion Rapidaptor
BiTorsion holders from Wera have a torsion spring design that absorbs smaller peak loads during screwdriving. The combined use with BiTorsion bits with their torsion zone distinctly extends the service life of the tool. Conveniently, BiTorsion holders from Wera can also be used with conventional bits.
Above-average service life
Even the service life of conventional bits is enhanced with the use of the BiTorsion holder and the BiTorsion bit also functions in a normal holder.
BiTorsion phase 1
The torsion spring integrated into the unique BiTorsion holder absorbs lower levels of peak loads (Phase 1). Any overloading of this spring is effectively prevented by means of a supporting mechanism.
BiTorsion phase 2
Higher peak loads are minimised through the torsion effect of the bit shaft (Phase 2).
Find out more about this product
Product description
Robust Bit-Check by Wera. Bit-Checks provide a quick overview of the tools available. Bits not needed are simply reinserted into the set and do not get lost. Simple transportation e.g. in the shirt pocket. Tough viscous bits for universal use. BiTorsion bits with Torsion zone - where kinetic energy is diverted from peak loads. This greatly extends the product service life. This provides the best possible durability together with the matching holder. Comes with Rapidaptor technology, which allows bits to be attached without any need to actuate the sleeve. The removal of the bit is simple, just by pushing the sleeve forward - for rapid bit change with just one hand. For the take-up of bits with ¼" hexagon head drive as per DIN ISO 1173-C 6.3 and E 6.3. Can be inserted in the power screwdriver or for use in the chuck of the electric drill.
Tools in this set
11/4" x 75 mm
05053923001
1PH 1 x 25 mm
05056420001
1PH 2 x 25 mm
05056422001
1PH 3 x 25 mm
05056424001
1PZ 1 x 25 mm
05056720001
1PZ 2 x 25 mm
05056722001
1PZ 3 x 25 mm
05056724001
10.8 x 5.5 x 25 mm
05056064001
11 x 5.5 x 25 mm
05056066001
11.2 x 6.5 x 25 mm
05056068001
