The handle/interchangeable blade system allows rapid exchange of the blades required for a wide range of applications.
- VDE-insulated Kraftform 817 VDE bladeholding screwdriver with anti-roll protection
- VDE blades (157 mm length) with practical spinning function, anti-roll protection and Take it easy tool finder: colour coding by profile and laser-engraved size indication
- Individually tested tools as per IEC 60900
- In a robust folding pouch
- Compatible with Wera 2go
Product features
Individually tested
Each Kraftform Kompakt VDE set has been tested individually at 10,000 volts, in accordance with IEC 60900.This ten-times-higher testing load guarantees safe working at their maximum permitted load of 1,000 volts.
The handle/blade system – Kraftform Kompakt VDE
Easy change
The Kraftform Kompakt VDE blades can be replaced simply by pulling down the yellow ring on the handle.
Take it easy
The Kraftform Kompakt VDE blades are equipped with the Take it easy tool finder. Colour coding by profile and laser-engraved size indication make it easy to identify the required tool quickly.
Hexagonal anti-roll feature against rolling away
The Kraftform Kompakt blades come with an anti-roll protection. The hexagonal shape hinders the blade from rolling away annoyingly at the workplace.
Fast turning
The palm of your hand is comfortably supported on the rounded shape of the rear end of the blades. This allows quick spinning of the blade and accelerates the screwdriving process.
Storage and transport
Storage and transport in a robust textile pouch, so the tools are well protected and always close at hand.
Find out more about this product
Product description
One 817 VDE Kraftform bitholding screwdriver, 12 VDE blades with Take it easy Tool finder: Colour coding by profile and laser-engraved size indication - for quick and easy identification of the required tool, 4 control cabinet keys, one single-pole phase tester. Individually tested at 10,000 V for safe working at the approved voltage of 1,000 V. In a robust belt pouch. The textile box features a fleece zone at the back. Using the provided self-adhesive hook-and-loop fastener strips, the textile box can be attached to the Wera 2go components. Or to the wall, shelf or workshop trolley.
Tools in this set
Part number: 05006613001
19 x 98 mm
05003990001
1PH 1 x 157 mm
05006510001
1PH 2 x 157 mm
05006511001
1PZ 1 x 157 mm
05006524001
1PZ 2 x 157 mm
05006525001
1# 1 x 157 mm
05006514001
1# 2 x 157 mm
05006515001
1# 1 x 157 mm
05006528001
1# 2 x 157 mm
05006529001
10.4 x 2.5 x 157 mm
05006500001
10.6 x 3.5 x 157 mm
05006502001
10.8 x 4 x 157 mm
05006503001
11 x 5.5 x 157 mm
05006504001
16.3 x 89 mm
05003460001
18.1 x 89 mm
05003461001
189 mm
05003462001
189 mm
05003463001
Hook and Loop Fastener Strip 70
150 x 70 mm
Applications :
Electrical / VDE
