The handle/interchangeable blade system allows rapid exchange of the blades required for a wide range of applications.
Kraftform Kompakt VDE 16 extra slim 1 Tool finder
05006608001, 16 pieces- VDE-insulated Kraftform 817 VDE bladeholding screwdriver with anti-roll protection
- VDE-insulated blades 157 mm length
- Reduced blade diameter with integrated protective insulation for lower-lying screws
- Blades with Take it easy Tool finder with colour coding by profile and laser-engraved size indication
- Individually tested tools as per IEC 60900 at 10,000 V
- In a robust folding pouch
- Compatible with Wera 2go
Product features
Individually tested
Each Kraftform Kompakt VDE set has been tested individually at 10,000 volts, in accordance with IEC 60900.This ten-times-higher testing load guarantees safe working at their maximum permitted load of 1,000 volts.
The handle/blade system – Kraftform Kompakt VDE
Easy change
The Kraftform Kompakt VDE blades can be replaced simply by pulling down the yellow ring on the handle.
VDE interchangeable blade with reduced shaft diameter
Reduced blade diameter with integrated protective insulation, allows sunken screws and spring elements to be accessed and actuated, individually tested as per IEC 60900.
PlusMinus screwdrivers
For the use in terminal blocks, control cabinets, switches, relays, sockets etc.
Take it easy
The Kraftform Kompakt VDE blades are equipped with the Take it easy tool finder. Colour coding by profile and laser-engraved size indication make it easy to identify the required tool quickly.
Hexagonal anti-roll feature against rolling away
The Kraftform Kompakt blades come with an anti-roll protection. The hexagonal shape hinders the blade from rolling away annoyingly at the workplace.
Find out more about this product
Product description
One 817 VDE Kraftform bitholding screwdriver and 14 VDE blades with Take it easy Tool finder: Colour coding and laser-engraved size indication. With reduced blade diameter and integrated protective insulation - low-lying screw and spring elements can be easily reached and operated. Individually tested at 10,000 V for safe working at the approved voltage of 1,000 V. One single-pole phase tester. In a robust belt pouch. The textile box features a fleece zone at the back. Using the provided self-adhesive hook and loop fastener strips, the textile box can be attached to the Wera 2go components. Or to the wall, shelf or workshop trolley.
Tools in this set
19 x 98 mm
05003990001
1PH 1 x 157 mm
05006512001
1PH 2 x 157 mm
05006513001
1PZ 1 x 157 mm
05006526001
1PZ 2 x 157 mm
05006527001
1# 1 x 157 mm
05006530001
1# 2 x 157 mm
05006531001
1TX 10 x 157 mm
05006534001
1TX 15 x 157 mm
05006540001
1TX 20 x 157 mm
05006541001
1TX 25 x 157 mm
05006542001
10.4 x 2.5 x 157 mm
05006500001
10.6 x 3.5 x 157 mm
05006506001
10.8 x 4 x 157 mm
05006507001
11 x 5.5 x 157 mm
05006508001
Hook and Loop Fastener Strip 70
150 x 70 mm
Applications:
Elektro / VDE
