Wera’s adjustable torque screwdrivers allow variable torque settings with maximum precision and ensure that the user gets the very best results in the familiar Wera design with superior ergonomics.
7443/61/9 Assembly set for tyre pressure control systems
05074745001, 9 pieces- Assembly set for tyre pressure control systems
- To monitor the tyre pressure on motor vehicles
- Optimum tyre pressure saves fuel and prevents tyre wear
- 9-piece set in a stable plastic case
Product features
Pre-set, adjustable torque screwdrivers
These tools are ideal for all applications where a constant, identical torque is required and where a high degree of repeat accuracy is needed. The torque value can be adjusted within the measuring range.
Adjustable Torque Screwdrivers
Setting with Speed
Simple setting of the required torque by hand.
Easy-to-read
Easy-to-read scale value.
Measurement accuracy
Measurement accuracy is ± 6 % (article 1430: ± 10 %) in accordance with the standard DIN EN ISO 6789. Distinctly audible and noticeable excess-load signal when the pre-set torque is reached.
Rapidaptor holder
Lightning-fast bit change without any extra tools. One-handed operation. With fast-rotating sleeve for easy wielding of the screwdriver.
The HF profile
In tight assembly or disassembly situations, for example in engine compartments, it is not possible to securely hold the screw with the hand on the screwdriver, and the screw subsequently often gets lost. Lengthy searches or the loss of the screw (with the associated danger that could bring about) are the consequence. The HF tools developed by Wera are ideal because they feature an optimised geometry of the original TORX® profile. The wedging forces resulting from the surface pressure between the drive tip and the screw profile mean that the screw is securely held on the tool!
Find out more about this product
Product description
9-piece tool set for the proper assembly and disassembly of tyre pressure control systems. Comes with torque technology for controlled screw tightening. Hand tool with multi-component Kraftform handle for high working speeds and ergonomic working. Two pre-set tools to connect the union nut with the screw and to fasten the sensor component to the valve. An adjustable Kraftform pistol handle for torque values of between 4.0 and 8.8 Nm. Two TX bits with holding function, socket adaptor, two sockets plus a valve dolly (for applications up to 4.5 Nm). Suitable for tyre control, systems from e.g. Schrader®, Alligator®, VDO®.
Tools in this set
17461 x 1.2 Nm x 1.2-3.0 Nm
(1)
05074716001
(1) The preset torque can be changed. However, this requires the use of special tools and Torque Test Equipment. Please contact the Wera Torque Service.
17443 x 4.0-8.8 Nm
05074705001
300 TX TORX® Torque-indicator
1TX 10 x 1.4 Nm
790 A/50 Nut Spinner Socket
111 x 50 mm
112 x 50 mm
867/4 TORX® HF bits with holding function
1TX 15 x 50 mm
1TX 20 x 50 mm
132 x 70 mm
05160111001
